Lancer FIberglass Enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72006
Printed Date: May 10, 2025 at 7:15 AM

Topic: Lancer FIberglass Enclosure

Posted By: crazy4ozs
Subject: Lancer FIberglass Enclosure
Date Posted: February 01, 2006 at 9:40 PM

hey guys this is my first post on this forum...im actualyl from caraudio.com...but id thouht id hit u guys up adn share the wealth ova here as well :)...here is my fiberglass box progress pics...enjoy, mor ewill be getting put up shortly, tell me what u think :-D

[IMG]https://i7.photobucket.com/albums/y295/zharbison/DSCN0264.jpg[/IMG]

heres my amp JL 500/1

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0828.jpg[/IMG]

the box all taped off wtih the sub in place (type r 12")

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0864.jpg[/IMG]

fist coat of resin down...

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0871.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/PICT0869.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/before1.jpg[/IMG]

MDF base laid down with all the fiberglass trimming down

[IMG]https://i7.photobucket.com/albums/y295/zharbison/after1.jpg[/IMG]

6 more coats of mat and resin later...

[IMG]https://i7.photobucket.com/albums/y295/zharbison/after3.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/assembly1.jpg[/IMG]

all the rings in place, the port is on the right, the mitsu emblem will be light up in red through the plexi with LED's

[IMG]https://i7.photobucket.com/albums/y295/zharbison/assembly3.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/logo2.jpg[/IMG]

[IMG]https://i7.photobucket.com/albums/y295/zharbison/logo4.jpg[/IMG]

thats it for now!!! have mroe up soon! tlel me what yall think!!!!! :) :) :)

Replies:

Posted By: mustangfoo
Date Posted: February 01, 2006 at 10:02 PM

LOOKING VERY GOOD !!!! nice job my friend. . . I like the Logo Idea pretty bad @$$ right there. keep working on it and keep the progress pics comin!!!

Posted By: juniorxs
Date Posted: February 02, 2006 at 11:54 AM

ilike the mitsubishi logo how did you cut it out, i was going to do the same thing with the router but the corners would have been rounded

Posted By: HottAccord
Date Posted: February 02, 2006 at 7:53 PM

Let me repost these for you, Im too lazy to copy and paste each one into my browser. I think you just needed to make the "-----------------------------------------

posted_image

heres my amp JL 500/1

posted_image

the box all taped off wtih the sub in place (type r 12")

posted_image

fist coat of resin down...

posted_image

MDF base laid down with all the fiberglass trimming down

posted_image

6 more coats of mat and resin later...

posted_image

all the rings in place, the port is on the right, the mitsu emblem will be light up in red through the plexi with LED's

posted_image

thats it for now!!! have mroe up soon! tlel me what yall think!!!!! :) :) :)

-------------
Im a fiberglass whore!!

Posted By: Cougar.Modder
Date Posted: February 03, 2006 at 3:24 AM

Very nice work here so far. Like the emblem idea as well. Will look sick I am sure. Just make sure the plexi is sealed and TIGHT so you get no rattles. That would really suck ass after all the hard work. Can't wait to see the finish product.

-------------
Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs

Posted By: jlord16
Date Posted: February 03, 2006 at 9:37 PM

Looking good so far, i too like the logo idea, shuld look sweet as

-------------
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*

Posted By: darthness
Date Posted: February 03, 2006 at 11:18 PM

sweet... can't wait to see this one done.

Posted By: crazy4ozs
Date Posted: February 03, 2006 at 11:55 PM

MORE PICS GUYS!!! this is the sub and port finally positioned in my car...as u can see, not a whole lot of head clearnece from the sub ring ;)...the sub will be inverted once installed and teh metal brances will be removed

posted_image

Posted By: H-a performance
Date Posted: February 04, 2006 at 11:58 AM

i hope you plan on reinforcing your rings before you wrap it, because i dont think your straping is going to be ridgid enough when you

stretch and get all the wrinkles out. i could be wrong, but just my experience you dont want those things moving when the glass is curing

Posted By: crazy4ozs
Date Posted: February 04, 2006 at 4:11 PM

i do teh metal is only there for temp support theyll b peplaced by wodden rods later, the only reason i did that was because u can change the shape adn posisiton of those much better than u can with wood ;)