Subs up front

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72075
Printed Date: April 29, 2024 at 3:37 AM

Topic: Subs up front

Posted By: maxxx
Subject: Subs up front
Date Posted: February 02, 2006 at 8:49 PM

I plan to make an enclosure on the floor in the front of my car for a pair of focal 5" subs, with a passive radiator. Anyways, what is the best (I assume least-shrinkage) fibreglass resin to use in this case? What is the preferred masking method for the carpet before laying resin?

-------------
destination moon

Replies:

Posted By: dubmanfunk
Date Posted: February 06, 2006 at 7:48 AM

hey there!

here are some good links: (from mazda forum but can be applied to any vehicle)

https://chris.pfharlock.com/glass/

https://www.ajquick.com/cars/tutorials/fiberglass.php

https://www.msprotege.com/forum/showthread.php?t=109035

Posted By: HottAccord
Date Posted: February 06, 2006 at 11:46 AM

All I did was mask off the carpet and it worked fine for me...

posted_image

-------------
Im a fiberglass whore!!

Print Page | Close Window