finishing the fiberglass?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72984
Printed Date: April 28, 2024 at 11:07 AM
Topic: finishing the fiberglass?
Posted By: the noob
Subject: finishing the fiberglass?
Date Posted: February 16, 2006 at 10:39 PM
i am making somthing for my speakers in my door of my 89 toyota and i was wondering how you get rid of the little bumps all over the body of the design what do i do to get rid of this?
Replies:
Posted By: cirrusly_fast
Date Posted: February 16, 2006 at 10:43 PM
try bondo? sand it, then cover with carpet, or sand it with fine grit, primer, paint and clear coat it.
-------------
Cuz I'm Kewl Like That.
System: 1-12" Orion H2, Crossfire VR2000D,Odyssey C2150 battery
Posted By: tex12gage
Date Posted: February 17, 2006 at 9:48 AM
Just a tip: when you spread the body filler, do sections at a time. then mix some more, Or you'll get in over your head pretty quick. ------------- TEX
Posted By: psychographic
Date Posted: February 17, 2006 at 9:52 AM
I find it easier to mix a little light on the hardener so you can cover as much as possible in one coat. It makes it easier to get things straight when it comes time to sand. But like anything with practice you will find what works best for you.
Posted By: the noob
Date Posted: February 19, 2006 at 9:42 PM
well thank you guys i think i got it down now its turning out good so far
Posted By: HottAccord
Date Posted: February 20, 2006 at 8:16 PM
Get some Rage Gold too..sands so easily!
-------------
Im a fiberglass whore!!
Posted By: Teamrf
Date Posted: February 20, 2006 at 11:32 PM
Do you have bubbles in your fiberglass?
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
|