removing gauge cluster

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73014
Printed Date: May 12, 2025 at 6:14 PM

Topic: removing gauge cluster

Posted By: unreality
Subject: removing gauge cluster
Date Posted: February 17, 2006 at 1:53 PM

hey, I've been having difficulties removing the gauge cluster in my 02 Hyundai Accent, I can get it to pop off easy enough, but the air control gauges are proving diifficult or confusing to me to remove. if anyone has any tips, that'd be great. a pic of what I'm trying to remove is at shark racing -> https://www.sharkracing.com/acecart/bin/shop.cgi?action=view&itemID=interior-ver&cate=010702000

basically, I need to get at the deck.

Thanks for any and all info

Craig McKee

Replies:

Posted By: blufab
Date Posted: February 17, 2006 at 7:10 PM

I had the same prob w/ my 9 accent. What i did was took out all screws & popped all clips, & pulled the deck from behind the fasia

Posted By: arrivalanche
Date Posted: February 24, 2006 at 1:00 AM

you have to disconnect the cable from the clips. there is one behind the glovebox and 2 down by the drivers feet on the side of the console. they keep the dash panel from letting go.

Print Page | Close Window