custom civic hatch, starting again
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74500
Printed Date: April 19, 2024 at 3:04 AM
Topic: custom civic hatch, starting again
Posted By: xkuco
Subject: custom civic hatch, starting again
Date Posted: March 14, 2006 at 10:47 PM
hey hows everyone doin im kinda new to all this forum stuff but any ways my name is jose and i am a painter and do custom fiberglassing ive only been doing it for about 2 years and have gotten pretty good at it my project car is a 1991 honda civic hatchback right know ive molded on a full body kit and wide body kit , shaved door handles, back center piece,roof lines , body lines, and the front corner lights. ive done alot and have put lots of money into it im 19 and done everything my self with no ones help and through trial and error and asking alot of questions finished exterior now im here for interior help i want to start working on the dash but want to fiberglass im good with fiberglass but not so good with wood and i dont like foam ive tried it metal is to risky . so i would like to know if any one would help me design a dash and we could brain storm and use everyones input by the way i taking in every ones opinions. bye the way heres the link i put them on photo bucket it was alot of pix lol https://photobucket.com/albums/e54/xkuco/
if any one has anything they want private (dont know why) but if they do they can email me at j69north69@yahoo.com if u can write here plz do thanks guys.
-------------
Replies:
Posted By: blufab
Date Posted: March 14, 2006 at 10:59 PM
First off welcome to the forum. Everybody here would be glad to help you in anyway that they can, just ask. If you search the forum you can find some of everything, kick panels , door panels, and others.just look. also if you look on this previous thread https://www.the12volt.com/installbay/forum_posts.asp?tid=73898&PN=1 , there are alot of techniques discussed that can be applied inside and outside the vehicle. Also checkout the demo buildup pics on the www.alpine-usa.com website for ideas. Be easy, Blufab
Posted By: xkuco
Date Posted: March 14, 2006 at 11:02 PM
i know already i just want opionions i have read and ive looked allover the internet for ideas i read mostly every entry in this forum but just seeing what people have to say and think
-------------
Posted By: xkuco
Date Posted: March 15, 2006 at 11:03 AM
i also just want to update people on my project and how everything is goin ima start my trunk soon cause im taking out my back seat so feel free to leave any suggestions or just comments thanks again
-------------
Posted By: blufab
Date Posted: March 15, 2006 at 4:36 PM
nice work on molding the kit, perfectly seamless. Do you plan on doing a trunk/backseat install or just trunk?
Posted By: xkuco
Date Posted: March 15, 2006 at 6:08 PM
turnk and back seat im really thinking of putting the roll cage in ima start on the backseat/trunk enclosure prbably this weekend or the next
-------------
|