plexiglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74829
Printed Date: May 09, 2025 at 10:14 PM

Topic: plexiglass

Posted By: ginuwine846
Subject: plexiglass
Date Posted: March 20, 2006 at 10:31 PM

how do u take a regular sheet of plexi glass and light it to where only the letters or words are lit up and not the whole sheet since its clear anyway. i really appreciate it for the advice

Replies:

Posted By: placid warrior
Date Posted: March 20, 2006 at 11:11 PM

etch what u want to glow and then light it from the sides. Use templates or whatnot...I think u can buy etch kits from some craft places, or u can take it to an engraver and get it done depending on how pro u want it.

Print Page | Close Window