wrinkles in vinyl

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75553
Printed Date: July 04, 2025 at 7:32 AM

Topic: wrinkles in vinyl

Posted By: nyguy4u
Subject: wrinkles in vinyl
Date Posted: April 02, 2006 at 11:01 AM

What's up guys?! I just recently vinyled my fiberglass box, and used 3M adhesive. For the most part, I am happy with how it came out. However, there are a few small wrinkles here and there that bother me, and without ripping the entire vinyl off the box, there is no way to spray behind the vinyl with adhesive. Is there a way to get small wrinkles out of vinyl? Steamer? Heatgun? Or am I just plain ole' screwed?

Replies:

Posted By: KarTuneMan
Date Posted: April 02, 2006 at 12:37 PM

Heat gun....warm it carefully, lift it and re-apply. Hopefully its not in the center section of a large piece of you box....that makes it a bit more difficult.

-------------

Print Page | Close Window