First enclosure
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76183
Printed Date: May 23, 2024 at 6:06 AM
Topic: First enclosure
Posted By: carb0n03
Subject: First enclosure
Date Posted: April 13, 2006 at 4:05 PM
THis is for a 2003 Hyundai tiburon. So basicall i taped up my entire trunk. However instead of using the factory panels as a backing i did my own. Now what i'm wondering is if i should have used the stock paneling. This is all for the backing of the enclosure which will be three peices so i can take it out if need be.
This is the first time i've used fiberglass so really if i did it the wrong way its a learning experience. I know how much hardener and proportions and most other things. So if it ends up not working, i guess ill just use the stock paneling right? Any help will be gretly appreciated. Oh and to drscribe what im doing im mounting a 1000/1 on the drivers side, a 300/4 on the passengers side, and a 13w7 in the spare tire well. I'm hoping to have a few pics up whenever my neighbor sends me them. Thanks for all the help
Chris
-------------
Project- Fiberglass trunk area to accomadate 13W7, 1000/1, 300/4
Replies:
Posted By: whitenoiz
Date Posted: April 16, 2006 at 10:36 AM
Using the stock panels is completely up to you! If you think it will help achieve the desired look and don't mind losing them go for it! If you have already made your own basic frames and such, stick with that!
|