Glass wont stick
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78247
Printed Date: May 14, 2025 at 8:59 PM
Topic: Glass wont stick
Posted By: smurphalurph
Subject: Glass wont stick
Date Posted: May 24, 2006 at 1:43 PM
Iv been glassing for a while now so I pretty much get the basics. I got a piece in my trunk that i wanted to glass so the paint would look good. Its a kinda plastic piece but it looks vinyl. When i did my buddys dash I used prepall on top then layed the glass overtop and it turned out fine, but when i did it to the trunk piece, when it cured the glass started to come off. I dont want a mold. Why wont it stick im confused now. Please help
-------------
When you do things right, people won't realize you've done anything at all.
Replies:
Posted By: bellsracer
Date Posted: May 24, 2006 at 3:30 PM
sounds like sealed cell plastic, pretty standard for vehicles. Give it a sanding with some medium/fine grit sandpaper and use some promotor to help it adhere better.
-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
Posted By: smurphalurph
Date Posted: May 24, 2006 at 10:42 PM
will try, thanks
-------------
When you do things right, people won't realize you've done anything at all.
|