My first box, tell me what you think!

Ok so im putting 4 twelves in my single cab f 150, thanks to all of your guys help i can say that im almost done! It just needs to be painted, then i will start working on the amp rack.Heres what it looks like so far and you guys feel free to put in your 2 cents. Keep in mind its my first fiberglass project lol.

theres my truck!

Theres the mold for the side panels

theres the front, i think its ready for paint im still debating on weather i need to do some more sanding or not

Theres my truck with 3 twelves in it, and dont mind the xplode that was replaced shortly after that pic lol.

so tell me what you think!!

-------------
4 12's in a single cab f-150... yeah its nasty

Cant really tell how its gonna go together by those pictures, maybe I just didnt look hard enough.  One suggestion though, it looks like you need some more bondo and sanding if you want it to be flat and even, its looks like its a bit wavy from what I could see and when its painted, you are really gonna know it.  Not too shabby at all for your first box though man!

yeah keep in mind, inside my truck the panels are taken out because im putting second skin on there for damping (muchhhh better then dynamat)

-------------
4 12's in a single cab f-150... yeah its nasty

Looks like a good start but its hard to tell what you have going there by those pictures. It looks like its mostly flat surfaces, how much of that is fiberglass? From the pictures it looks like it could have been made almost completely out of MDF. But, none the less it looks like you did a good job for your first attempt.

most of it is mdf, the sides are fiberglass, and then i rapped the whole thing in fleece when it was finished, to make all the curves come to gether, resined that, and then bondo'd the rest of it

-------------
4 12's in a single cab f-150... yeah its nasty