Print Page | Close Window

Have you seen this enclosure?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78513
Printed Date: May 11, 2025 at 6:50 PM


Topic: Have you seen this enclosure?

Posted By: juniorkusch
Subject: Have you seen this enclosure?
Date Posted: May 31, 2006 at 10:34 AM

Having troubles coming up with ways to put my new !2" H2 Orion in a Fullsize Chevy.

I found it on this website under Car Audio: Woofer enclosures.  Heres the link;

https://www.the12volt.com/caraudio/boxes.asp

Any info would be apprieciated.

Thanks

JR




Replies:

Posted By: the12volt
Date Posted: May 31, 2006 at 10:44 AM

It's a bandpass enclosure I created for show in a Dodge Ram (2000, I think). It's the same type of enclosure illustrated below. Definitely not the best sounding enclosure, but it looked nice :|

posted_image



-------------
posted_image the12volt • Support the12volt.com



Posted By: juniorkusch
Date Posted: June 01, 2006 at 10:42 PM

Thanks for the reply,

I know its a bandpass enclosure, I'm more interested in the seat arrangements.

I have a 40/60 setup, and the pic looks like a 40/20/40, or two buckets with a consoule in the middle.  The interesting part being the backrest being one piece with the consoule and passenger seat.

Were they custom or stock? If so I could look for that setup.

Thank you

JR Kusch




Posted By: the12volt
Date Posted: June 02, 2006 at 10:04 AM
The seats were stock. The folding backrest / armrest for the center seat was not attached to the passenger seat, only to the center seat.  It was removed and mounted to the enclosure.

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window