6 12’s in a fiberglass box
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79770
Printed Date: May 03, 2025 at 12:27 AM
Topic: 6 12’s in a fiberglass box
Posted By: highridindodge
Subject: 6 12’s in a fiberglass box
Date Posted: June 29, 2006 at 8:42 PM
I am building a box for 6 kicker comp vr 12's. It is 14.25 ft.^3 . I was wondering if anyone could help me with the port size. i planned on using 2 and want it to be tuned to around 33 hz. Any help would be greatly appreaciated.
Replies:
Posted By: Melted Fabric
Date Posted: June 29, 2006 at 10:54 PM
Not sure, you might want to try the crowd in the Car Audio Forum------------- I have not failed. I've just found 10,000 ways that won't work.
When you do not know what you are doing and what you are doing is the best -- that is inspiration.
Posted By: austincustoms
Date Posted: July 11, 2006 at 1:04 AM
are you doing them all into one enclosure, or will they be seperated? I personally would go with 6 seperate enclosres, and 6 ports. But three enclosures with three ports wouldn't sound too bad. What is this going in?
Posted By: auex
Date Posted: July 11, 2006 at 3:55 AM
If fiberglass then it needs to be curvy and have lots of bracing.
Look for a program called WinISD. It will help with ports and internal volume.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: dangerranger96
Date Posted: July 16, 2006 at 2:09 PM
My friend did 6 comps in two boxes... not sure on any of the specs, but it was LOUD and he had a port for each sub.
-------------
97 F150, Sony CDX-M630, Sony XM-2165GTX, JL Audio 12W3D2, Planet Audio VX-602, Memphis 15-MC5.7
Yeah it's a mutt, but mutts make the best dogs!
|