Print Page | Close Window

Phoenix area upholstery supplies

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79981
Printed Date: May 17, 2024 at 1:36 PM


Topic: Phoenix area upholstery supplies

Posted By: deterhop
Subject: Phoenix area upholstery supplies
Date Posted: July 06, 2006 at 10:15 AM

 not sure where to post this..I.'m new to Phoenix area (Scottsdale actually). Looking for a places to get carpet,vinyl, etc. Any suggestions with places you've dealt with?thanks



Replies:

Posted By: Melted Fabric
Date Posted: July 06, 2006 at 10:48 AM

Well, rather than hunting around locally online, I would just look online.  There are endless fabric resources on the internet.

Hop on google and type in vinyl / fabric supplies.



-------------
I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.




Posted By: audiocableguy
Date Posted: July 06, 2006 at 12:24 PM
www.selectproducts.com

They are a bit on the pricey side, however I have never had a problem with anything from them.

If you need really highend drivers or home audio stuff in Phoenix see: https://www.speakersetc.net/
Bill and Marcellino are incredible guys.




Posted By: auex
Date Posted: July 07, 2006 at 8:53 PM
Mesa Sales, Tempe Sales, Fabric Depot(couple of them in phx), etc... They are all local.

The vinyl is behind the counter so you will have ask for it. I have dealt with Mesa Sales the most, vinyl is $14 a yard and they have a good selection.

Mesa Sales Incorporated
2233 E Main St
Mesa, AZ 85213
(480) 833-7025

Tempe Sales Company
412 W Broadway Rd
Tempe, AZ 85282
(480) 967-4811

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.





Print Page | Close Window