Print Page | Close Window

Rear Van Doors used as Sub Enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80254
Printed Date: May 10, 2025 at 6:53 PM


Topic: Rear Van Doors used as Sub Enclosure

Posted By: dawg_
Subject: Rear Van Doors used as Sub Enclosure
Date Posted: July 13, 2006 at 1:04 PM

Have a 2004 Express Van , I have been thinking of using the Reardoors themselves as the enclosures for the subs, I would have to build a front baffle that will seal the interior side of the door , I also will be dynamatting the complete inside of the door itself, Thhe question I have is will the door enclosure be sealed enough or will I need to build fiberglass enclosures inside each area. I also believe i could buils .65cu enclosures with MDF that could be attached to the door. Give me some ideas.... I am thinking of installing a 10" RF punch P310d2 in each door.

Give me what ya got.



-------------
2003 Chevy Express Conversion van. Built by Quality conversions, Modified By OWNER



Replies:

Posted By: dawg_
Date Posted: July 13, 2006 at 2:49 PM

Figured that was the answer ... Geez havent played with fiberglass since 95 when i installed image dynamic horns & 8s in the kicks of a firebird....

guess it never changes.... back to the garage I go.



-------------
2003 Chevy Express Conversion van. Built by Quality conversions, Modified By OWNER


Print Page | Close Window