Ported Fiberglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80620
Printed Date: May 10, 2025 at 1:41 PM

Topic: Ported Fiberglass

Posted By: scionlife89
Subject: Ported Fiberglass
Date Posted: July 22, 2006 at 6:36 PM

i am new to these forums but i recently purchased 2 Powerbass Xtreme 3XL-12D 12" Subwoofers and it says that they are designed to work in a ported enclosure, and i was reading up on a lot of fiberglass enclosures but all of them are sealed and i was wondering if there is any way to make a custom enclosure for these and have it ported?

Replies:

Posted By: austincustoms
Date Posted: July 22, 2006 at 10:19 PM

make the enclosure with a "speaker ring" type mount to later add your port. After you measure the volume of the box and calculate the length of your port, attach it to your mount. You can get ports at selectproducts.com or partsexpress.com.

Print Page | Close Window