Print Page | Close Window

Plastic roll type door

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81710
Printed Date: May 18, 2024 at 6:58 AM


Topic: Plastic roll type door

Posted By: CTOH
Subject: Plastic roll type door
Date Posted: August 16, 2006 at 9:44 PM

do any of you guys know where to find a plastic "roll' type door, the type that will slide on a soft 90 degree elbow?  i have an h2 customer that previously had his ac controls moved into the center floor console, hes tired of opening and closing the lid to adjust the ac and wants to have a slide type door...thanks for any help,,,




Replies:

Posted By: sprawl85
Date Posted: August 18, 2006 at 11:31 PM
like a bread box?


-------------
fiberglass reminds me of peanut brittle... but fiberglass tastes better!



Posted By: juniorxs
Date Posted: August 19, 2006 at 4:54 AM
Have a look at this, this is the sort of thing you are looking for, but on a pc case mod.            look at this



Posted By: killer sonata
Date Posted: August 19, 2006 at 1:52 PM
i dont imagine that would be too hard to make. just a track with small thing ABS plastic rectangles with fabric glued to the back of them to hold them all together



Posted By: CTOH
Date Posted: August 19, 2006 at 2:34 PM

sprawl85 wrote:
like a bread box?

Yes




Posted By: CTOH
Date Posted: August 19, 2006 at 2:37 PM

juniorxs wrote:
Have a look at this, this is the sort of thing you are looking for, but on a pc case mod.            look at this

Which part of that,,,I didn't see what I was needing but wanted to make sure I was seeing the right thread, thanks




Posted By: crazyoldcougar
Date Posted: August 19, 2006 at 9:16 PM
on side note that is the most incredible Pc case i have ever seen...

-------------
Fiberglass Guru.



Posted By: juniorxs
Date Posted: August 20, 2006 at 5:10 AM
CTOH]< wrote:
>Which part of that,,,I didn't see what I was needing but wanted to make sure I was seeing the right thread, thanks

towards the bottom of the page it says blast door with a video clip, there's a touchcreen monitor with the type of door your after covering it



Posted By: Melted Fabric
Date Posted: August 22, 2006 at 5:22 PM
That is just ...crazy. Hell of a pc case. And get this, the whole thing is made out of pancake batter.....

nah, just kiddingposted_image

-------------
I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.




Print Page | Close Window