How to on painting

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=81879
Printed Date: May 03, 2024 at 5:57 PM

Topic: How to on painting

Posted By: elmaschingon_18
Subject: How to on painting
Date Posted: August 21, 2006 at 7:11 PM

Sup fellas,

Just got my new paint gun, it's seems like alot of fun but don't know how to use it! lol! well at least mixing the paint to spray. any tips/ tech articles/ advice! I'm all ears. please help!

-------------
sanding sucks!

Replies:

Posted By: Velocity Motors
Date Posted: August 22, 2006 at 8:18 AM

Maybe this thread will help you answer some questions.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Melted Fabric
Date Posted: August 22, 2006 at 6:10 PM

Nice, thread. I was just wet sanding my car last night with 600 grit too. I only wanted to remove the clearcoat so I could touch it up in some areas. It came out real nice, going to finish the other half tonight.

-------------
I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Posted By: Melted Fabric
Date Posted: August 22, 2006 at 6:13 PM

Whoops, another thing to. When you are wet sanding, it helps to put a little (not a lot) dishwashing soap in your bucket of water. It assists with cleaning the area as you wet sand. Always keep the area you are working on wet. Th is also applies when engaging in sex. But the grit is different. posted_image

-------------
I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Print Page | Close Window