resin off car?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83257
Printed Date: May 10, 2025 at 1:21 PM
Topic: resin off car?
Posted By: 03blks
Subject: resin off car?
Date Posted: September 23, 2006 at 1:58 PM
so i just realized that i got resin on the exterior of my car. actually on th fender. is there anyway i can get this off? and yes its already dry. this sucks
Replies:
Posted By: Velocity Motors
Date Posted: September 23, 2006 at 2:05 PM
Is it a droplet or smeared on ?
Droplet : Use a small screw driver and hammer and tap it off the paint. Make sure that the screw driver is almost level ( 180 degree ) af the droplet.
Smeared: Use a soft cloth with acetone to wipe off the dried fiberglass. Right after you wipe the suface have a wet cloth to wipe off the acetone, otherwise it will eat away at your clearcoat and paint.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: integratyper934
Date Posted: October 16, 2006 at 3:07 AM
man that sucks.......i think your going to have a mark after that. how did u manage to get fg on the fender anyway?
|