ok, so maybe ive done other projects, but these are the only ones i have pictures of.. i started out by trying to add some vinyl to my GF's door inserts. that failed miserably ( too many compound curves for a beginner), so i decided to Fiberglass them smooth .. personally i dont like it this way cause its uncomfortable, but she likes it, and its her car, thats what matters right ;)
here are some pics of that.. (p.s.) this was my first project, and could have had some things done differently i know..
Note: the panels used to be ALL tan, so i bascially made the entire interior black and red for her... seats and carpet is next..
https://idolcreations.com/messageboard/garage/upload/garage_gallery-4-1130716831.jpg
second projects.. i took this on with a friend, i cannot take all responsability for this.. i will post progress pics, cause well who doesnt like to see the progression from start to finish?
Before:
https://www.idolcreations.com/messageboard/garage/upload/garage_gallery-4-1125359212.jpg
During:
https://idolcreations.com/gallery/albums/misc/na025.jpg
https://idolcreations.com/gallery/albums/misc/na027.jpg
https://idolcreations.com/gallery/albums/misc/na030.jpg
https://idolcreations.com/gallery/albums/misc/na022.jpg
https://idolcreations.com/gallery/albums/misc/na023.jpg
https://idolcreations.com/gallery/albums/misc/na039.jpg
After:
https://idolcreations.com/messageboard/garage/upload/garage_gallery-4-1158016434.jpg
the sides and rear were wingswest, so i didnt bother posting too many photos on that, the major work was creating the front lip, it was taken from an integra type R , 5-6 incles were taken out of the middle front and about 5 inches on each side were added to the sides so it would reach to the wheel well...
i think it flows nicely with the car, and moulded really nice...
Comments and suggestions for next time more than welcome (positive or negative)
Next: Custom trunk enclosure :D i really wanna try this out.. i have ideas in my head, just gotta put them to paper, then to practical
nice, very well done with the front lip.
-------------
G-Boys Customz
Northville, MI
good work on the intregra's kit, make sure u post pics of the boot install
-------------
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
the sides were just extended with more FG so they would reach teh wheel well, they were coming up short.
the wheels are not stock, just some 15's shes running for now... she plans on getting 17";s in the spring
slayer1011 wrote:
the wheels are not stock, just some 15's shes running for now... she plans on getting 17";s in the spring
17" will be great on that car.
-------------
Shaking The Neighborhood
