eclipse spyder inclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84090
Printed Date: May 10, 2025 at 4:09 PM

Topic: eclipse spyder inclosure

Posted By: jraguilar
Subject: eclipse spyder inclosure
Date Posted: October 13, 2006 at 1:48 PM

i want to make a custom box for my eclipse since its the spyder i have limited space.. 12'' inch sub amp and a copacitor but how do i get started what kind of wood should i use??

-------------
jraguilar

Replies:

Posted By: bomex_eclipse
Date Posted: October 22, 2006 at 10:04 AM

What do you plan on the sound system to look like. You need to use MDF wood for the base, framing, and where ever there is a flat surface for the best strength hope this helps you post some pics of what you want it to look like

-------------
If You Can Imagine It Glass It!

Posted By: integratyper934
Date Posted: October 22, 2006 at 8:55 PM

i did a false floor for a 12" alp R and flushed/beauty boarded two alp amps on the trunk wall behind the convertible.

Posted By: joescarstereo
Date Posted: October 29, 2006 at 10:28 PM

You could build wood box and then stretch material over the trunks lip under the rubber seal take a look at the one I did on my site I think its on the last page of the gallery. its (Joescarstereo.net )it is a burgandy spyder its quick and cheap

-------------
The Car show Kings

Print Page | Close Window