Backseat fiberglass project

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84197
Printed Date: May 10, 2025 at 5:47 AM

Topic: Backseat fiberglass project

Posted By: ridin4jesus
Subject: Backseat fiberglass project
Date Posted: October 16, 2006 at 11:00 AM

Whats up all, have a 98 civic and im going to put 2 12" audiobahns in the back seat area. This weekend i striped the entire backseat area and cut out the mdf board im going to place their, cut out the mdf spearker rings and the amp rack, and i got to fiberglass one of the boxes. when i get done i'll have 2 12's in the backseat, 2 12's in the trunk, 6 6.5's throughout, and a fiberglass panel to go from between the seats all the way to the panel. Gonna post pics of what i did so far later today.

Replies:

Posted By: realitycheck
Date Posted: October 16, 2006 at 2:24 PM

Cool bud, get em up.

-------------
Learning the trade one fiberglass creation at a time!

Posted By: ridin4jesus
Date Posted: October 17, 2006 at 8:10 PM

ok guys here you go, sorry this is late but i had to take advantage of the daylight after work to get some more done.

this is the trunk completely striped

posted_image

this is the back seat with the first mdf board down

posted_image

this is the area were the passenger seat used to be

posted_image

this is both 12" fg boxes for the audiobahns with only the resin on them(waitin for the to dry, then layer dem up)

posted_image

here is the dash lookin like someone stole all my stuff

posted_image

heres the fg door panel piece, i have to trim the edges down and hot glue the mdf ring

posted_image

last but not least here is a pic of the factory engine, all my honda riders give me some suggestions on makin her fast. Not street racin, just some pep in the step

posted_image