new to fiberglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86758
Printed Date: May 02, 2024 at 8:58 PM

Topic: new to fiberglass

Posted By: manofalltrades
Subject: new to fiberglass
Date Posted: December 06, 2006 at 9:36 PM

hi all, I started to fiberglass two subs enclosure and its 40 degrees, is it ok for me to do it at this temp @ one layer at a time?

Replies:

Posted By: boostedrst
Date Posted: December 07, 2006 at 1:51 AM

put a lil extra hardener and hit it with a heat gun

Posted By: maliboom
Date Posted: December 07, 2006 at 7:12 PM

If you get a space heater and heat up your work area first you will be able to fiberglass normally. Just remember to turn the heater off while you work so there wont be a fire hazard. I fiberglass when its -20 degrees in winter and this method work well.I do live in Canada and three months a year I have to do this. Having the heat gun for after you do your layers helps alot too.

Print Page | Close Window