Print Page | Close Window

mounting fiberglass box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87634
Printed Date: May 11, 2025 at 2:44 AM


Topic: mounting fiberglass box

Posted By: blacka4
Subject: mounting fiberglass box
Date Posted: December 22, 2006 at 10:36 AM

Well my box is done but im having a bit of a hard time figuring out how to mount it any idea's?

https://i126.photobucket.com/albums/p82/elcapa/PC100269.jpg

https://i126.photobucket.com/albums/p82/elcapa/PC100271.jpg

Before https://i126.photobucket.com/albums/p82/elcapa/PA290222.jpg

After    https://i126.photobucket.com/albums/p82/elcapa/PA290223.jpg

There is no space under to box to mount a bolt and i only have about 1/2" lip on the fender well.




Replies:

Posted By: maglin
Date Posted: December 22, 2006 at 10:42 AM
weld a tab in? i'm sure its not outside body metal in that place...



Posted By: blacka4
Date Posted: December 22, 2006 at 11:21 AM
posted_image
I think what im going to do is f/g tabs on the bottom of the box to fit in the slots (2-red cirles at bottom of screen) Then the red circle on the top has holes already so im going to run a threaded rod threw the box with metal and rubber washers.




Print Page | Close Window