Fibreglass Problems

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87669
Printed Date: May 11, 2025 at 9:46 PM

Topic: Fibreglass Problems

Posted By: jacob787
Subject: Fibreglass Problems
Date Posted: December 22, 2006 at 10:35 PM

Hey i am making a custom console. And after i hav put the resin and filler on and the polyester filler on and sanded it some bits of it has sanded down bak to the original wood wat should i do to cover this up and get it bak to the stage where i can paint it?

Replies:

Posted By: jacob787
Date Posted: December 23, 2006 at 4:21 AM

can someone help me?

Posted By: StealthEs
Date Posted: December 23, 2006 at 9:23 PM

I think you are sanding too much if you back at the wood. To paint it just primer it up.

-------------
Cris

Posted By: djdowdell
Date Posted: December 24, 2006 at 6:40 PM

Even if some bits of wood are showing it will be fine unless you got deep into the wood. As long as everything is smooth and uniform it wont matter especially if it's only a lil bit here and there. But ditto to the primer before painting.

-------------
Pure Noize

Print Page | Close Window