vinyl wrapping with frame

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89824
Printed Date: May 09, 2025 at 7:32 PM

Topic: vinyl wrapping with frame

Posted By: wotugot4me
Subject: vinyl wrapping with frame
Date Posted: January 31, 2007 at 6:27 AM

I've heard of this being done but wanted to find out if anyone has tried it and what sucess they had. Its using a frame slightly bigger then the piece you want to wrap made of wood, then you staple the vinyl to this wood. Glue your piece and vinyl and then push the frame down over the piece (kind of like a vacuum wrap but without the vacuum). Apparently the pressure will get most of the vinyl to sit properly even on curves (not major curves). Has any one ever tried this? Sounds good for wrapping dashes and kickpanels if it works.

Replies:

Posted By: Velocity Motors
Date Posted: January 31, 2007 at 7:13 AM

Sounds like more work to me to have to make another frame. If you learn proper vinyl techniques, then you wouldn't have to have to make another frame to have your vinyl sit properly.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: wotugot4me
Date Posted: January 31, 2007 at 7:41 AM

Yeah, I've done all my wrapping by hand in the past but was just curious to see if anyone had tried this method and if it works. Especially if you are making more then one part the same.