carbon fiber finish

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91000
Printed Date: May 10, 2025 at 2:50 AM

Topic: carbon fiber finish

Posted By: maxxheadroom
Subject: carbon fiber finish
Date Posted: February 26, 2007 at 1:20 AM

I am wondering if anybody has tried laying down 1 or 2 layers of carbon fiber on the final layer of a FG box for a carbon look?

-------------
WDTSF

Replies:

Posted By: realitycheck
Date Posted: February 26, 2007 at 10:58 AM

It has been done. You'll need to let your other glass dry first. Get some epoxy resin the clear stuff to use on the carbon fiber though so it doesnt look brown. Its pretty tedious cause its hard to make the carbon fiber look right. Since carbon fiber is usually vacuum bagged. It can be done though.

-------------
Learning the trade one fiberglass creation at a time!

Print Page | Close Window