Print Page | Close Window

circle making tool

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9138
Printed Date: May 16, 2025 at 9:42 AM


Topic: circle making tool

Posted By: messiah9966
Subject: circle making tool
Date Posted: February 06, 2003 at 12:36 PM

Does anyone know of a good jig or router attachment for making circles for speaker rings?

-------------
R. CLARK



Replies:

Posted By: audiomechanic
Date Posted: February 06, 2003 at 8:19 PM
the perfect circle, jeseda makes a couple and sears sells oneor if you really want you can make one your self..... not that bad to do...the perfect circle is the best I have use dso far...select product sells it for about as cheap as anyone else....installguy509



Posted By: messiah9966
Date Posted: February 07, 2003 at 11:33 AM

you seem to be the main advice giver on this sight-  thanks for all your help, I certainly appreciate it greatly! 

              Thanks installguy509



-------------
R. CLARK



Posted By: POWERSTROKE
Date Posted: February 11, 2003 at 11:54 AM
www.jasperaudio.com     they sell them cheap at www.partsexpress.com 



Posted By: auex
Date Posted: February 11, 2003 at 5:57 PM

Don't know about you guys but at the shop I worked at we made our own out of 1/4 inch plexi that had a rounded bottom with a router attached to the top.  It may take some time to make and adjust but is still cheaper then to buy one.



-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: -=LM=-Raven
Date Posted: February 11, 2003 at 11:11 PM

I use a Shopbot CNC router  they are about $9,000.00  after complete setup.  You can see one at www.shopbottools.com

T.Carlson


Print Page | Close Window