glassing up to weatherstrip?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92145
Printed Date: May 08, 2024 at 4:16 PM

Topic: glassing up to weatherstrip?

Posted By: alphalanos
Subject: glassing up to weatherstrip?
Date Posted: March 26, 2007 at 1:59 PM

Sorry if this has been posted. Id like to make an enclosure for the trunk of my Civic that meets the edges of the weatherstripping. What is the easiest method to do this? First Id make an MDF floor, then make the frames for the subs and amp, then im not sure of the best way to do the fleece. Heres a pic of the same model Civic I have so basically Id like to copy this. Thanks!

posted_image

Replies:

Posted By: austincustoms
Date Posted: March 27, 2007 at 12:50 AM

Pull your fleece tight under the weatherstripping, glass it, add a few layers, then take it out to finish it. When you put it back in, it will sit right up to the edge. Be sure to tape tape tape EVERYTHING, and have a new seal on hand to replace after you glass it.

Print Page | Close Window