fiberglassing obs door panels
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92692
Printed Date: May 01, 2024 at 10:53 PM
Topic: fiberglassing obs door panels
Posted By: bad ass chevy
Subject: fiberglassing obs door panels
Date Posted: April 08, 2007 at 1:19 PM
i have a 1989 chevy regular cab and have done alot of good fiberglass work but havent done any door panels...ive heard tha i need to remove the vinyl before glassing because of fiberglass doesnt stick to vinyl good but anyways im wanitng to completly redesignmy doro panels and put two 6 1/2's,three tweeters,and one 3 1/2 in each door and a skelteton bone arm rest...any advice before i start?
Replies:
Posted By: bad ass chevy
Date Posted: April 08, 2007 at 1:25 PM
sorry about the repost guys,my computer froze up and i dont no what happend
Posted By: auex
Date Posted: April 08, 2007 at 2:00 PM
I would say reconsider what speakers and how may you are actually putting into the door. Are you doing the speakers for looks or actual sound?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: bad ass chevy
Date Posted: April 08, 2007 at 2:23 PM
well basically just for looks but they shouldnt sound to bad
-------------
baged with Kp Components,in the process of laying it out
"its what you build not what you buy"
Posted By: bad ass chevy
Date Posted: April 08, 2007 at 2:24 PM
well basically just for looks but they shouldnt sound to bad
-------------
baged with Kp Components,in the process of laying it out
"its what you build not what you buy"
Posted By: bad ass chevy
Date Posted: April 08, 2007 at 2:28 PM
i dont understand why it keeps duplicating what i am writing
-------------
baged with Kp Components,in the process of laying it out
"its what you build not what you buy"
Posted By: bad ass chevy
Date Posted: April 08, 2007 at 2:29 PM
i dont understand why it keeps duplicating what i am writing
-------------
baged with Kp Components,in the process of laying it out
"its what you build not what you buy"
Posted By: auex
Date Posted: April 08, 2007 at 8:50 PM
You are not refreshing the page after you post are you? How much experience do you have with fiberglass?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: bad ass chevy
Date Posted: April 08, 2007 at 9:53 PM
|
