impala ss 94 96 door pods

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93813
Printed Date: May 10, 2025 at 8:08 AM

Topic: impala ss 94 96 door pods

Posted By: rawcustumz
Subject: impala ss 94 96 door pods
Date Posted: May 11, 2007 at 12:42 PM

I made these for my 95 SS and thought I would see what you guys thought.
I am using Arc Audio FD6000 components
Here is the stock door panel.
posted_image
Here it is after the pod.

Another

I was able to make these and secure them w/out modifying the door panel, not even one little screw hole. The reason I made them like that instead of blending them in and molding them to the door is because the panels are very hard to find and if you do find some they are very expensive. If I ever come across another pair I will modify them and blend them in and make them look stock. For now though I am very happy with these.
They sound great and to my surprise there is no rattle which is the one thing i was concerned about.
So what do you guys think?
Thanks for looking and your comments
Later
Bernie

-------------
Bernie
MECP Certified
64 Impala Wagon
2007 Camry LE

Replies:

Posted By: bellsracer
Date Posted: May 15, 2007 at 1:11 AM

How did you attach them to the door panels? The only thing I could think of would be using the grille and bolting in between the grill spaces. I would like to know how you did that.

Thank you very much for sharing

It looks really good. I hope you find some affordable panels to blend in new pods.

Ganbatte ne!

-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Posted By: rawcustumz
Date Posted: May 15, 2007 at 11:30 AM

bellsracer wrote:

How did you attach them to the door panels? The only thing I could think of would be using the grille and bolting in between the grill spaces. I would like to know how you did that.

Thank you very much for sharing

It looks really good. I hope you find some affordable panels to blend in new pods.

Ganbatte ne!

Thats how i did it. And I just made sure my mid bass speaker didnt touch the door.
Thanks
Bernie

-------------
Bernie
MECP Certified
64 Impala Wagon
2007 Camry LE