building spare tire tub enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94572
Printed Date: April 25, 2024 at 8:01 PM

Topic: building spare tire tub enclosure

Posted By: hub_n_hun
Subject: building spare tire tub enclosure
Date Posted: June 06, 2007 at 8:32 PM

Sorry if this is in the wrong section. I have a 2001 prelude and the trunk isn't that big so I decided to use the spare tire tub. I have 3 PG X10D4's from my previous car and want to put them in my prelude. I also have a PG X1200.1 and X200.4, for those who know what those are know they are really big.

My question is, will it not sound as good as say a regular full MDF box? I am going to measure volume and make sure there is plenty of fibreglass layers so it shouldn't make a difference, right? Anyways, let me know what you think of doing this and how it will sound.

Thanks,

Corey

Replies:

Posted By: bellsracer
Date Posted: June 07, 2007 at 11:56 AM

It SHOULDN'T make a difference but that is always possible. As long as the box is the proper size and the structure is strong, there should not be any noticeable difference. As compared to an MDF box, FG boxes potentially do better because they do not bleed air through it.

Good construction (and hopefullly enough airspace) will make the project kick butt!

Ganbatte ne!

-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Posted By: hub_n_hun
Date Posted: June 07, 2007 at 5:05 PM

Thanks, that's all I needed to hear. posted_image