ported enclosure
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94906
Printed Date: May 06, 2024 at 9:23 AM
Topic: ported enclosure
Posted By: Clif
Subject: ported enclosure
Date Posted: June 18, 2007 at 6:01 PM
making a ported fiberglass box, dose it matter where i put the port? what would work the best?
-------------
hmmm.... was that the right wire?
Replies:
Posted By: jmelton86
Date Posted: June 18, 2007 at 6:49 PM
Vehicle? Sub(s)? Amp(s)? How big? SPL evidently?
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
Posted By: Clif
Date Posted: June 18, 2007 at 11:10 PM
well i had that all figured out, its my sebring convertible, i have 2 10s and 1 15. the 15 is in a 3.15 cu ft box that is now ported. and i have the port 3.75 inches wide and about 6.5" long. so it is tuned to right around 32. A good spot for spl and sql as i want a lil of both. my amp is a clif designs amp, 1000 rms 2400 peak,(well 160 amp fused) so yea. um amp is running at 4 ohms, 1 channel to the 2 10s and the other to the 15. i just wanted to know where the best spot would be for the port, the box is made in the spare tire wheel well. as of now i just made a whole in the top kinda so its pointing right into the cab. sounds better then it did but i know it can still do better. The reason why i ported it was cause the box had a ton of holes in it and i cant find them in the fiberglass and i decided to port it to save some time an money.
-------------
hmmm.... was that the right wire?
|