reading alpine sws-1243d type s manual
Printed From: the12volt.comForum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95122
Printed Date: May 21, 2024 at 9:13 PM
Topic: reading alpine sws-1243d type s manual
Posted By: saoxcore
Subject: reading alpine sws-1243d type s manual
Date Posted: June 25, 2007 at 11:46 PM
and its specifications on building a box. i have no clue how to build a box, and really... i dont know what im looking at with all these numbers and everything. first off, some information.
sub- alpine sws-1243d type s, 12 inch 4ohms dual coil
car- 1988 plymouth sundance 4dr
type of box- ported
i have links to sub enclosure calculators, but i dont know how to fill them out, i dont know what to put.
here are pics of my manuel.
i do recognize that it says the box should be 1.25-2.0ft, just fyi incase you needed to know that to help me out more
heres some additional information
mounting dpeth= 127mm (5")
mounting diamater-front mount= 289 mm (11.4")
displacement-front mount= 0.084ft(then theres a tiny 3 at the top of the "ft)
added volume-reverse mount (maagnet out)= 0.082ft(3 on top again)
(i just realized that info is given on the pic, haha oops)
sub- alpine sws-1243d type s, 12 inch 4ohms dual coil
car- 1988 plymouth sundance 4dr
type of box- ported
i have links to sub enclosure calculators, but i dont know how to fill them out, i dont know what to put.
here are pics of my manuel.
i do recognize that it says the box should be 1.25-2.0ft, just fyi incase you needed to know that to help me out more
heres some additional information
mounting dpeth= 127mm (5")
mounting diamater-front mount= 289 mm (11.4")
displacement-front mount= 0.084ft(then theres a tiny 3 at the top of the "ft)
added volume-reverse mount (maagnet out)= 0.082ft(3 on top again)
(i just realized that info is given on the pic, haha oops)
Replies:
Posted By: bellsracer
Date Posted: June 26, 2007 at 9:36 PM