finishing fiberglass in mustang

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95135
Printed Date: May 03, 2024 at 8:50 PM

Topic: finishing fiberglass in mustang

Posted By: memphis9
Subject: finishing fiberglass in mustang
Date Posted: June 26, 2007 at 12:37 PM

It been a long time since I updated my topic and I see it was closed. So here are some new pics.

posted_image

Kick panels wrapped in suede with red stitching

posted_image

The old door panels. I didn't like them to much so I redid them.

posted_image

Getting ready to run wires.

posted_image

Running the RCA's and mids and highs.

posted_image

The amp on the top of the picture is a soundstream TRA880.5 This is the amp that I'm going to be using. The other two are a Kicker ZR1000 and a crappy Jensen. I'm using these two as a size comparison.

posted_image

The rear seat delete.

posted_image

Starting the new door panels.

posted_image

The door pod hold one 6.5 mid bass and one 3.5.

posted_image

There should be more pictures up tonight.

-------------
G-Boys Customz
Northville, MI

Replies:

Posted By: bellsracer
Date Posted: June 26, 2007 at 9:44 PM

Me Likey.

Looking good so far. Umm just a quick question though, it might just be my monitor or that I am kinda sleepy but it looks like the speaker holes are a pinch too big for the speakers on the doors. It looks like I can see some of the mounting area past the surrounds.

Other than that, GOOD JOB!

Yokudekimadoodiea!

-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Posted By: jeepfreak
Date Posted: August 09, 2007 at 6:31 PM

wasthe stock door panel 2 pieces?

Posted By: cutlass013
Date Posted: August 10, 2007 at 2:39 PM

wow amazing yah the speaker hole sut out is a little big maybe hes getting some type if grille to protect the speakers....did you cut the original door panel in half?