s 10 dash pixneed more info

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95232
Printed Date: April 27, 2024 at 4:50 AM

Topic: s 10 dash pixneed more info

Posted By: basist_4
Subject: s 10 dash pixneed more info
Date Posted: June 30, 2007 at 1:19 AM

I saw this picture on the front page of this site... posted_image

As my 91 Sonoma's dash is pretty much trashed (No stereo and no glove box lid)...I may do something similar and would like some more information on the build up on this project.

can anyone point me in the right direction???

Thanks in advance

Replies:

Posted By: spawn12336
Date Posted: July 04, 2007 at 4:03 PM

Looks like an mdf trim panel with cutouts for the electronics then wrapped, seems fairly straightforwad

-------------
"the universe has a way of balancing itself"

Posted By: bellsracer
Date Posted: July 06, 2007 at 12:20 AM

Really? It looks more like a large sheet of Textured ABS that was heated and formed to the proper curve of the dash. It could be just me, but it doesn't look flat on the dash. There is a slight curve to it and ABS would make it a LOT easier to get that. The texture also makes me think it is ABS as well.

-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.