would this enclosure work?
Printed From: the12volt.comForum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96119
Printed Date: May 10, 2025 at 3:06 PM
Topic: would this enclosure work?
Posted By: 01trublugt
Subject: would this enclosure work?
Date Posted: August 02, 2007 at 11:40 AM
If I were to build a box shaped something like this in an effort to keep the top of the magnet flush with the top of the box would it work?? Lets say the distance between the mounting point of the sub and the floor of the box was maybe 3" max
Replies:
Posted By: the12volt
Date Posted: August 02, 2007 at 11:48 AM
Try adding the image to your post by using the 
button.
-------------
the12volt • Support the12volt.com
button.-------------
the12volt • Support the12volt.comPosted By: 01trublugt
Date Posted: August 02, 2007 at 11:49 AM
Posted By: bellsracer
Date Posted: August 03, 2007 at 11:16 PM