Print Page | Close Window

anyone ever carbon fiber?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96991
Printed Date: May 14, 2025 at 2:59 AM


Topic: anyone ever carbon fiber?

Posted By: boost4me
Subject: anyone ever carbon fiber?
Date Posted: September 09, 2007 at 3:13 AM

Just wondering if anyone has ever done any carbon fiber work on a  dash, console or pillars and if so, how hard was it?

-------------
fabricating just for entertainment



Replies:

Posted By: boost4me
Date Posted: September 09, 2007 at 3:15 AM
also does anyone have any pics if they have done any of this type of work before?

-------------
fabricating just for entertainment



Posted By: djdowdell
Date Posted: September 09, 2007 at 2:26 PM

boost4me wrote:
Just wondering if anyone has ever done any carbon fiber work on a  dash, console or pillars and if so, how hard was it?

I haven't physically worked with it myself but an ex-employer of mine made sure I was familiar with the process. I wouldnt say it was hard per se but very,very involved. Much more than fiberglass. Not to be too short but I also dont want to be too long I will try to give you an overview. First you need to create the piece (dash, door panel, etc.) in fiberglass. Then you need to make a mold of the piece. Next you need to set up all the material to vacuum bag it and lay the carbon fiber and epoxy and hook up a vacuum pump to suck out all the air and make sure the piece comes out smooth. It's very involved and expensive but if you really want to do it go for it!



-------------
Pure Noize


Print Page | Close Window