w7 mounting
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97041
Printed Date: May 05, 2024 at 8:13 AM
Topic: w7 mounting
Posted By: thakidp
Subject: w7 mounting
Date Posted: September 11, 2007 at 12:46 AM
this may seem like a dumb question but i just got a w7 and i heard somethin about peeling back the rubber lip to drill it down but i dont really see how could someone help me out please??
-------------
thakidp
Replies:
Posted By: tubbs04
Date Posted: September 11, 2007 at 9:28 AM
On a W7 before you install that trim ring that fits over the surround, you should be able to push the surround towards the inside and that will expose your holes to drill it down...
-------------
...don't crush the weasel...
Posted By: thakidp
Date Posted: September 11, 2007 at 9:35 AM
what trim ring? i just got it off ebay so maybe i dont have it thats why im not sure what u mean
-------------
thakidp
Posted By: pss5075104
Date Posted: September 11, 2007 at 9:38 AM
a polished silver ring on the outside.
-------------
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
Posted By: thakidp
Date Posted: September 11, 2007 at 9:43 AM
okay i just got the trim ring off but the holes are still covered what do i do next?
-------------
thakidp
Posted By: jvillefinest
Date Posted: September 11, 2007 at 3:36 PM
https://mobile.jlaudio.com/pdfs/W7_MountingSystem.pdf try reading thier website... ------------- 2007 Acura TSX
SQ setup in the works
Posted By: tubbs04
Date Posted: September 11, 2007 at 5:16 PM
take your finger and push the surround towards the center of the cone... that will expose the holes.....
-------------
...don't crush the weasel...
|