parrot 3200ls and kenwood kdc mp728
Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102049
Printed Date: May 12, 2025 at 10:35 PM
Topic: parrot 3200ls and kenwood kdc mp728
Posted By: briansrt
Subject: parrot 3200ls and kenwood kdc mp728
Date Posted: February 10, 2008 at 3:17 AM
Maybe someone can help me out on this one. I called Crutchfield tech support and asked for help with installing the Parrot 3200LS with my Kenwood radio. It has 2 amps connected, both via RCA jacks. The guy at tech support said that my best bet would be to use an external speaker, but that's not something I have room for. I have a regular cab pickup truck and don't really have anywhere to put an external speaker. Can anyone recommend a good way to connect the Parrot to my setup. Oh, I have a 98 Dodge Dakota R/T. Thanks in advance to anyone who can shed some light on this for me.
Replies:
Posted By: jeffwhiteman
Date Posted: February 12, 2008 at 11:06 AM
The external speaker is fairly loud. You can wire tie (zipp tie) it under the dash on the driverside to a wire harness or something rugged. be careful not to interfere with the steering. You can also hardwire the speakers. This can be done using a cheap line output converter.
|