bluetooth car kit

Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102280
Printed Date: May 11, 2025 at 1:32 PM

Topic: bluetooth car kit

Posted By: kfeaster
Subject: bluetooth car kit
Date Posted: February 17, 2008 at 2:15 PM

any info on the wire call out to install raytell 4200 bluetooth in to 2008 chev silverado 1500 need color call out for phone + and - and mute color

-------------
Mudpuppy

Replies:

Posted By: cpiguy
Date Posted: February 24, 2008 at 1:26 AM

I've been using the raytel ego flash for the past few weeks and the voice activation is phenomenal. If the telphone 4200 is anything close you will be very satisfied. Pick up a GMSS-3 to really complete the installation. Good luck! I think you mean the colors on the kit right.

red - 12v constant

brown - ground

blue - 12v switched

yellow - mute

purple - line out+

green - line out -

Posted By: nicestuff
Date Posted: February 24, 2008 at 7:23 AM

The Raytel pin out cpiguy gave you is correct, however you are dealing with the LAN vehicle. You are going to have to use the harness. If you are able to successfully avoid it, please, let us know.

As for the harness, if the truck is non-Bose, it would be cheaper to use our 68253 ($59). Unfortunately, due to the bad design of Raytel mute relay (it did not change with replacement of Tellphone with Ego), the most inexpensive solution ($29) would only provide you with the muting of the one and only speaker the kit uses, so harness has to have its own relay to mute everything and send the sound to the 2 front ones. If the truck is Bose besides GMCSS-3 you could use our 68384 ($109).

Print Page | Close Window