bluetooth into cars with factory amps

Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105728
Printed Date: April 19, 2024 at 4:09 PM

Topic: bluetooth into cars with factory amps

Posted By: kassdog
Subject: bluetooth into cars with factory amps
Date Posted: June 27, 2008 at 12:10 AM

Quick question about putting a aftermarket bluetooth system into a car with a factory amplifier. For example a 2008 tahoe with a bose system. Now if i'm putting a parrot system and don't have an external speaker can I catch the speaker wire behind the headunit or do i have to go to the out put of the amplifier. This always made me curious.

Replies:

Posted By: Silvrefox
Date Posted: June 27, 2008 at 8:19 PM

After the amp before the speakers is where I go. I did it on accident on a Pilot and wow, car next to him could hear him loud and clear.

-------------
BOOSH!!

Posted By: hurleyloser
Date Posted: August 16, 2008 at 1:51 AM

output of the amplifier on most amplified systems, you can go to the back of the radio on high level input factory amplified systems though.

-------------
MECP Master Certified Technician
ASE A6 Certified Technician

Print Page | Close Window