Print Page | Close Window

pioneer btb200

Printed From:
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
Printed Date: July 28, 2021 at 2:47 PM

Topic: pioneer btb200

Posted By: t&t tech
Subject: pioneer btb200
Date Posted: May 14, 2011 at 4:02 PM

So i hooked this up for a customer yesterday with a AVH -4200dvd touch panel pioneer unit, and for the life of mr i can't get it to come through the speakers, he is using the front pre-outs on the deck to and amplifier so no speaker wires are connected from the unit. Could this be the cause, or is the sound supposed to come through the pre-outs as well?



Posted By: i am an idiot
Date Posted: May 14, 2011 at 8:38 PM

Their units with built in bluetooth only use the front channels of the deck.  RCA and speaker wires both work.  But if you have the RCA cables connected to the rear channels of the deck, you will have no sound.

Posted By: t&t tech
Date Posted: May 15, 2011 at 12:36 PM
I know this Mr IAAI, i got it working, i plugged the ip bus connector into the wrong port. My badposted_image, it happens when you're working in the dark.


Posted By: howie ll
Date Posted: June 02, 2011 at 5:09 AM
Oh Darren working in the dark ends up costing you money!

Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: t&t tech
Date Posted: June 02, 2011 at 7:55 PM
I know howard, lol, had no choice.


Print Page | Close Window