Relays for the parrot ck3100 and onstar
Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71283
Printed Date: May 21, 2024 at 7:37 PM
Topic: Relays for the parrot ck3100 and onstar
Posted By: lmfarmer
Subject: Relays for the parrot ck3100 and onstar
Date Posted: January 22, 2006 at 3:00 PM
I have installed the CK3100 in my 2004 Chevy Silverado. I used the GMCELL from Soundgate, and Soundgate faxed me the wiring diagram to install relays to fix it where Onstar will work. Now that the relays are installed, my car kit will not mute the radio. But, if I turn on Onstar, then try my car kit I can hear the the car kit. But, I can't leave Onstar on to use my car kit. Is there any suggestions on how I can resolve this problem?
Replies:
Posted By: lilchepe
Date Posted: January 30, 2006 at 10:11 PM
i would suggest to first check where u got your power from maybe your car kit is getting the power from the onstar.
Posted By: Customautomotiv
Date Posted: February 01, 2006 at 1:09 AM
I have read and read posts about GMCELL.....and it seems everyone has a problem with it. I have stated this before in this forum.......dont use it. The harness from cellsite is 100x better and it interfaces with the onstar system flawlessly...I have never had a problem...and I have done at least 100 tahoes/suburbans/silverados this way. Just make sure you also get the LOC-1 (line output converter) from cellsite as well, especially if you are installing a motorolla kit.
Posted By: cbcaldwell
Date Posted: April 19, 2006 at 11:52 AM
Hey wil the cellsite harness(GMCSS-2) also work with the motorola IHF1000 bluetooth kit? thanx CB.Caldwell
Posted By: Customautomotiv
Date Posted: April 20, 2006 at 11:13 PM
Ya..it will work with any handsfree car kit.
Posted By: cbcaldwell
Date Posted: April 21, 2006 at 4:31 PM
Great!! I have a costomer that wil be very happy to hear this....Thanx CB.Caldwell
Posted By: Customautomotiv
Date Posted: April 21, 2006 at 10:32 PM
make sure you get the LOC-1 with it too.
Posted By: quiznos
Date Posted: June 06, 2006 at 10:26 PM
do you know if the harness will work in a 2006 Corvette with factory Bose/NAV/OnStar? Will be installing the Parrot 3200
Posted By: Customautomotiv
Date Posted: June 07, 2006 at 1:16 AM
You dont need the harness for the corvette. You can actually run it through the amplifier under the passenger side carpeting. Contact me if you want the diagrams.
Posted By: hafr
Date Posted: August 04, 2006 at 1:09 PM
I Also, at one time used the GMCELL. Now I use the cellsite adapter. On an ihf 1000 or a parrot kit, use the line level outputs.On the motorola it is the blue and yellow, and on the ck3100 parrot it is the thin green and brown wires. Also you probably wont need the line output converter(loc1) if you are using low level inputs. Thanks customautomotive, you got me off of the GMCELL product. ------------- Rich Hawthorne
Hands-Free installations
"don't talk with your hands full"
516-no-hands
Posted By: mcrewsq
Date Posted: August 05, 2006 at 2:26 AM
need help on a 02 Q45 factory Bose/rear amp non-nav intalling parrot ck3100 quickconnect's harness was incorrect. don't want to cut, would like a harness...... anybody got a suggestion ------------- mcrewsq
Posted By: Customautomotiv
Date Posted: August 05, 2006 at 10:51 AM
Try... https://peripheralelectronics.com/web/blnc.asp They have cellfi harnesses for Nissan vehicles, which I have used in Infinities before. I havent used it in the Q45 though. Try calling their tech dept.
|