Print Page | Close Window

New alarm now car wont start

Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73076
Printed Date: June 30, 2025 at 2:55 PM


Topic: New alarm now car wont start

Posted By: boss sounds
Subject: New alarm now car wont start
Date Posted: February 18, 2006 at 12:26 PM

Hi I installed a clifford arrow 5 today in my 200sx S13 by just cutting the old alarms loom (toad A101CL) and wired the new alarm to that every thing was fine(armed and disarmed several times) until the alarm stopped working i tryed to find the fault but gave up in the end and decided to take it out and send it back because its probaly a faulty unit but now my car wont start it turns the engine over but wont fire up ive wired it up as to bypass the immobiliser so i know it isnt that any help with this would be great.



Replies:

Posted By: arrivalanche
Date Posted: February 23, 2006 at 11:26 PM
you might have better luck with a reply when if you post in the right forum.... this is cellular and communications


Print Page | Close Window