parrot 3100 in 05 suburban

Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87917
Printed Date: April 28, 2024 at 6:08 PM

Topic: parrot 3100 in 05 suburban

Posted By: autocomjoe
Subject: parrot 3100 in 05 suburban
Date Posted: December 28, 2006 at 8:45 AM

I am installing a parrot 3100 in an 05 suburban with a factory bose system. I have used the cell-site harness in the past and didn't get the sound quality that I did in vehicles that I spliced directly into the speaker wires. Is it a big deal to spice in after the amp? If not, are the wire colors the same as they are at the back of the stereo?

Replies:

Posted By: integratyper934
Date Posted: December 31, 2006 at 1:14 AM

the wires on the back of the stereo are the inputs to the bose. grap the spkrs after the amps and hook up the to front doors, and the rear doors(optional i hook up 2 spkrs on cars sometimes). then use the mute wire and a relay to cut the main 12volt to the bose amp to mute everything else.

Posted By: Customautomotiv
Date Posted: January 04, 2007 at 1:22 PM

autocomjoe wrote:

I am installing a parrot 3100 in an 05 suburban with a factory bose system. I have used the cell-site harness in the past and didn't get the sound quality that I did in vehicles that I spliced directly into the speaker wires. Is it a big deal to spice in after the amp? If not, are the wire colors the same as they are at the back of the stereo?

Did you use the LOC-1 when installing the GMCSS-1? This converter tones down the pink noise and the poping sound that usually arises when using this harness.

Posted By: elicoleman
Date Posted: January 09, 2007 at 11:48 AM

What is the ohm rating on Bose system speakers?

-------------
2003 GMC Yukon, Kenwood 815DVD w/ Nav. Memphis speakers. Kenwood 1200W Amp, Alpine 400W amp. Rear view camera, headrest monitors. Parrot CK3100