parrot 3200 acura rsx type s 06
Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92764
Printed Date: April 28, 2024 at 2:36 AM
Topic: parrot 3200 acura rsx type s 06
Posted By: csnut18
Subject: parrot 3200 acura rsx type s 06
Date Posted: April 09, 2007 at 9:03 PM
Hi everyone, I have a 2006 acura rsx type s with the bose system and I would like to install one of the parrot systems possibly the color one. I understand I will have to run the speaker wires from the parrot to the outputs of the factory bose amp to bypass it. My question is is their a way to wire the parrot's mute wire into this car? There is no factory mute button on the radio so I really have no clue how to handle this. Any help would be greatly appreciated.
Replies:
Posted By: pitoaudiovisual
Date Posted: April 29, 2007 at 10:58 PM
you can put a relay to the ignition wire. put the relay and the mute wire will turn off the radio but im not sure if the bose system will work once you mute the radio the way im saying that..
-------------
Confidence is the key to any project!!
Posted By: porschemaniac
Date Posted: May 01, 2007 at 9:25 PM
Try www.quickconnectproducts.com/donotcut.html
Posted By: jlfn56
Date Posted: June 04, 2007 at 2:48 PM
Also try a company called Parrot Solutions. www.hfvt.com all of their contact is on the site they also manufacture plug and play solutions they do a great job and I have been using them for my bluetooth and wiring harnesses on the east coast for a little while now. I call them with questions and they usually have the answers
Posted By: integratyper934
Date Posted: June 10, 2007 at 12:52 PM
dont put a relay to the radio.....thats lame. check for a mute on the factory radio, if there isnt one you can put a 30amp relay to the constant of the amp or better yet interupt the remote turn on. i believe its a white wire not positve though. just test at the amp under the seat.
Posted By: integratyper934
Date Posted: June 10, 2007 at 12:56 PM
directechs says brown for amp turn on......but never know there wrong alot.
Posted By: integratyper934
Date Posted: June 10, 2007 at 12:59 PM
this may also help. you can take out the back seat cushion and pull the carpet forward and there is 2 harness' . one goes left and the other right. you can grab alot of the wires there. if i remember correctly all the speaker outputs and amp turn on are there(could be just the rears and tweeters no mids, just test first). might be easier and look cleaner than doing it at the amp....
Posted By: csnut18
Date Posted: June 10, 2007 at 1:18 PM
integratyper934, thanx for your informative reply. I just have a question for you though which might sound retarded but I am not a professional installer just a guy trying to save a few bucks doing these things himself. How would I wire up the relay to interrupt the remote turn on wire? I am not very knowlegeable as far as what terminal does what on a relay. Thank you so much
|