led bar 4 wire vehicle 5 wire
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101147
Printed Date: July 18, 2025 at 6:28 AM
Topic: led bar 4 wire vehicle 5 wire
Posted By: mrsparky637
Subject: led bar 4 wire vehicle 5 wire
Date Posted: January 14, 2008 at 12:09 PM
I put an led bar on my truck, 2002 Chevy silverado, below the tailgate. I came with a 4 wire plug, but my system is differant. I have a seperate brake wire instead of turn signal and brake together. I hardwired it and everything works but the brake lights. I tried jumping from turn signal to brake wire it would work for a while but would cause brake light to stay on constant. How can I get this problem resolved?
-------------
mrsparky637
Replies:
Posted By: mrjc480
Date Posted: January 17, 2008 at 4:16 AM
The LED should just plug into your 4way flat trailer hookup. If you dont have this plug then you should have the wire harnass tucked near the bumper. The owners manual should tell you what wires are what.
-------------
Im moving to MEXICO and Im not speaking spanish!
|