Print Page | Close Window

break/tail light bar

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102247
Printed Date: May 15, 2024 at 9:19 AM


Topic: break/tail light bar

Posted By: popeyesurf
Subject: break/tail light bar
Date Posted: February 16, 2008 at 11:49 AM

Hi, hopeing you can help me with advice on resistors for the following- 

i going to have a go at building a light bar similar to the one in the link (if it works) and useing the leds (also in a link)

my question is what resistors will i need to get the leds to turn brighter when breaks are apply'd, i've just done a repair on one the same as in the link for a fellow hilux owner and forgot to check the colour bands on the risistors in it, (it's all sealed up now and cant check) they seem to be wired (on a thin circuit board) in groups of four with a risistor each, (one leds had failed and the track near it had split, so it knock'd out four leds on this bar), how do i wire them to get this dual brightness, i dont want to buy this ready make one after looking at the build quality plus i want to use more leds than this one has, not sure how many yet till i find a suitable houseing for them, thanks for any help,

ian



-------------
two steps forward, three back



Replies:

Posted By: popeyesurf
Date Posted: February 16, 2008 at 11:52 AM
https:////dll?ViewItem&ih=018&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=280173603494&rd=1

-------------
two steps forward, three back



Posted By: popeyesurf
Date Posted: February 16, 2008 at 11:56 AM
https://..co.uk/100-ULTRA-BRIGHT-RED-5mm-LEDs-12000mcd-NEON-LED_W0QQitemZ250012221227QQihZ015QQcategoryZ66954QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

-------------
two steps forward, three back


Print Page | Close Window