wiring offroad lights

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103297
Printed Date: May 15, 2025 at 12:29 AM

Topic: wiring offroad lights

Posted By: peco
Subject: wiring offroad lights
Date Posted: March 21, 2008 at 4:47 PM

I just picked up a pair of KC Daylighter ® 130w System offroad lights for my 2002 Chevy Blazer. Could someone tell me how to install the lights so they are wired with the option to have the lights WITH THE HIGH BEAMS - OFF - JUST THE OFFROAD LIGHTS ON (on-off-on). I think I'll need a 3 way switch and have to tap into my high beams but not sure about the relays and other things that will be need. Thanks

Replies:

Posted By: i am an idiot
Date Posted: March 21, 2008 at 5:50 PM

The switch in the picture is as you stated an On-Off-On toggle switch. The relay connections are as follows. 85 needs to be grounded. 86 goes to the switch 30 goes to the battery via a 10 Ga. wire with a 15 amp fuse and fuse holder mounted as near the battery as possible. 87 provides power to the lights.

posted_image

Print Page | Close Window