Print Page | Close Window

flasher output

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107427
Printed Date: May 13, 2025 at 6:07 AM


Topic: flasher output

Posted By: jcbell
Subject: flasher output
Date Posted: September 14, 2008 at 9:14 AM

Is the output on a standard flasher relay an on/off or is there some shunting



Replies:

Posted By: Velocity Motors
Date Posted: September 14, 2008 at 9:25 AM
2 pin you just put one lead to a (+) input and the other lead to the device (+) that you want to trigger.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: jcbell
Date Posted: September 14, 2008 at 9:29 AM
I am trying to hold flasher  output voltage momentarily using cap but cannot hold the voltage. need 1 sec over relay coils


Print Page | Close Window